With this encoder you can create DVD compliant MPEG2 files.

Format

Option to define what kind of MPEG2 to create. PAL and NTSC is supported.

Display sspect

Defines the aspect for the video(DAR).

Field order

Sets the fields dominance.

Interlacing

With this option you can choose how FFAStrans processes incoming media to the encoder. The "Analyze"option will determine from the actual video, not meta-data.

Resizing

Sets the resizing method for how the source should fit to the output size.

Stretch will stretch the source to fit regardless of aspect.

Fit will fit the entire source within the output size and keep aspect. This might cause letterboxing or curtains.

Fill will make sure the output is filled with source image while keeping aspect.

Video range

Sets the video range of the output.

Same as source implies no change and the encoder will forward the range from the input.

Set to full/limited will just set the video range metadata.

Convert to full/limited will convert the input to set value. If input range is same as output no converion is being performed.

Apply LUT or automatic tone mapping

Enables using a LUT in the conversion. This option also support using a custom by setting using a variable representing the full path to a .cube file. Variables representing any of the available inbuilt LUTs is also supported.

None implies no LUTs are being used in the conversion.

Auto (LUT) will try to analyze the input file and the desired out color space and apply the corresponding LUT for it.

Auto (Tone mapping) will convert using tone mapping algorithm instead of a static LUT.

Set active video width to 702

This option will make resize source to maximum 702 with additional 9 pixel padding on each side to make a 720 video.

Video bitrate (kb/s)

Here you set the bitrate of the video.

Transwrap

This option skips transcoding but will try to conform the input to an DVD compilant file.

Wrapper

Here you set the output format of the MPEG2 file. The ISO produce a ready to burn DVD ISO file.

Creating DVD ISO depends on"dvdauthor" from http://dvdauthor.sourceforge.net/ and "mkisofs" from http://cdrecord.org/. Both supplied.

Discrete tracks

Sets the number of audio tracks/streams of the output file. One track can have one ore more channels.

Source channels as tracks

This setting will distribute all source audio channels into discrete mono channels.

Same as source

This settings will make FFAStrans try and create the exact same layout as the original media.

Total channels

Sets the total amount of channels the output file holds. The channels are evenly distributed among the available discrete tracks defined. Regardless of the original layout, all audio channels are mapped to separate audio sources. Based on this, FFAStrans will map these sources to match selected audio configuration.. If the audio source has fewer channels than the output then the rest will be filled with silent audio.

If you select "Custom channel mapping" in the "Total channels" drop-down, FFAStrans will enable setting custom mapping per audio track:

Set custom mapping

This will open a separate window displaying all discrete track selected in the "Discrete tracks" drop-down.

For usage and how to configure press the "?" button in the "Custom audio mapping" window.

Audio codec

Sets the audio format and codec ofthe output media.

Audio bitrate (kb/s)

Here you set the bitrate of the audio. Note that PCM is fixed on 16 bit little endian.

Sample rate

Sets the sample rate of all audio streams.

Conform volume

Use this to conform volume level to specified level. For this to work you MUST have a variable table from a previous analyze in the "Loudness"-node. You can also use this option to normalize audio by using the peak levels from "Loudness"-node. Maximum level is 0 dB.