Page 1 of 1
2 mono channels to 1 stereo channel
Posted: Fri Nov 16, 2018 1:56 pm
by sebird
Hello,
i'm trying to convert 2 mono channels (left-right) to one stereo channel. I tried some configurations with ChannelMapper without success... The solution is perhaps Avisynth but i can't manage it how i want... Actually i can have channel one on the left channel and channel two on rhight channel on output (with X264 coder). If i use Custom FFMpeg the sound is good but i have a frame problem on the video... Can you help me? Thank's in advance....
Re: 2 mono channels to 1 stereo channel
Posted: Fri Nov 16, 2018 4:48 pm
by momocampo
Hello,
I don't see where is your problem, if you want to encode in x264, create a h264 node and put 1 in "discrete track"s and 2 in "total channels" (FFASTRANS v 0.9.3) you will have 1 track with 2 channels.
Is this that you want?
Cheers.
Benjamin
Re: 2 mono channels to 1 stereo channel
Posted: Mon Nov 19, 2018 9:34 am
by sebird
Hello,
thank's for your answer. In fact i would mix channel 1 and channel 2 onto 1 stereo channel. Each channel on each side. With this configuration i have channel 1 on the left and channel 2 on the right.
Re: 2 mono channels to 1 stereo channel
Posted: Tue Nov 20, 2018 6:05 pm
by admin
Hi sebird,
I'm a bit confused about what the issue here is. Do you want to mix the channels and thus create dual mono (same on L and R)? By nature FFAStrans will distribute channels as is to the layout specified on the encoder. So under normal stereo scenarios you will have mono channel 1 -> L and mono channel 2 -> R. Is this not what you want?
-steinar
Re: 2 mono channels to 1 stereo channel
Posted: Mon Nov 26, 2018 1:29 pm
by sebird
Hello,
thank's for your answer!
Yes i want to mix the channels and make dual mono. In the H264 coder layout i can use only 1X2. If i choose 2X1 or other one it stay at 1X2 after save...
Re: 2 mono channels to 1 stereo channel
Posted: Mon Nov 26, 2018 2:53 pm
by emcodem
Hi sebird,
what i do to get 2 mono tracks (each one channel of course) to map to one output stereo track is just to add this options to the custom ffmpeg:
-map 0 -map 1 -map 2
As the default output for mp4 h264 is one stereo track, i do not need to specify more than that.
What you mean by: "If i use Custom FFMpeg the sound is good but i have a frame problem on the video."
Re: 2 mono channels to 1 stereo channel
Posted: Tue Nov 27, 2018 7:47 am
by admin
Ok, so the problem here is the mixing. Currently, FFAStrans does not have any inbuilt mixing capability so for now you will need to sort that out with a custom avisynth script or custom ffmpeg node. If you have tried any of those please share what you have tried.
Also, please update your FFAStrans. The "streams X channels"-method was changed in the latest 0.9.3 version.
-steinar